Carrier heat pump acts as an air heater during the winter season as well as an air conditioner during the summer. Basically, it helps to ensure that you will have a comfortable environment in your house. It can be considered as the most economical device to carry heat and disperse it to your home evenly. One of the most important regular maintenance on this pump is to adjust and change the fan speed accordingly to provide the desired temperature.
You can always change the fan speed yourself if you know the right way to do it. It is fast, simple and easy. First of all, you will have to identify the control panel location for your heat pump outside your house. Most of the unit nowadays has three type of speed; high, medium or low. If you prefer a higher temperature of air dispersed from the pump, you might want to select medium or low. Choose high fan speed if you want a cooler air.
All heat pumps are equipped with switches for you to set either to winter mode or summer mode according to your season. Switch on the heat mode during winter season and AC mode during summer season. It is usually being set manually. These are all the setting at the outer side of your HVAC unit.
Now, when you return to your house, you can set your desired temperature. This can be done using the remote control with variable units. Other than setting the temperature, there are lots more parameters that can be set such as the timer and swing mode. When you have set to the desired parameters, the internal sensor will be triggered. It will then automatically control the fan speed so that the carrier heat pump is able to provide the temperature required.
This is an economical unit to provide heating and cooling air to your home. Remember to select the correct fan speed to avoid losing too much energy through the vent.
No comments:
Post a Comment