Smart Tips About Air Conditioning Service

Air conditioning is responsible for controlling the humidity within a household and cooling areas of unwanted heat. It uses a liquid refrigerant pumped out from a compressor to flow through coils and create sub-zero temperatures within, and then air flows across the coils to create a predetermined climate for the user. To maintain a healthy lifestyle, an air conditioning system is also made to filter out all the dust, pollen, or any other forms of dirt, and to help sterilize the air. The components within the system can become contaminated over time and will need to be cleaned and/or serviced periodically. Failing to do so can result in equipment failure and can cost a lot out-of-pocket. Practicing preventative maintenance is very important when looking to save money down the road.

Preventive maintenance programs can be implied to help save costly service calls whether its a commercial or residential unit. These programs involve regular inspections that require checking all of the equipment and making sure everything is working in proper order. Things such as the efficiency of the intake filter and its ability to flow 100% and how well it traps dust particles must be ensured. Build up can start to occur on the filter and it will slow the efficiency of air being produced and can create a major restriction within the unit. Making sure that these filters are cleaned or replaced every 3 to 6 months is crucial.

Closing the vents and doors in certain rooms can have a negative drawback to the operation of the system. It can set an off-balance effect when closing these doors and can increase the pressure within the system and can damage any weak points in the ductwork. This can create a lot of unwanted problems that may not arise right away. Any cracks in window seals, or doors that do not close completely, will greatly effect the efficiency of the air conditioning unit. Making sure all the seals along windows are intact and sealed tightly will help to store the cold air inside the room. If there is too much of a loss of air some where within the household, the compressor will not shut off and will continue to over work itself to cool the house, and can lead to catastrophic equipment failure.

Setting the correct climate during the day while no one is home is very important in energy and cost savings. A climate setting 10 degrees cooler than the outside temperature is good to go by. Secure these settings weekly and compensate for any changes in outside climate.